Proton V-4 instructions for use

Description: ASV Proton V-4 series is a scanning device that visualizes data from magnetic microwave sensor arrays in real time. It takes its full name according to the number of sensors. ASV Proton V4 Includes four sensors.

Operating Modes: Gaussmeter, Live Shooting, Ultrasonography (Ultrasonography), Auto memoryless shooting, Manual memoryless shooting, Auto Memory Shooting, Manual Memory Shooting has 7 operating modes.

Gaussmeter: It reflects the magnetic field intensity of the environment in which it is located to the user numerically and audibly. If there is an anomaly in the environment that can change the magnetic field strength, it is warned to the user visually and audibly.

Live Capture: In this mode, data is transferred to the computer in real time. A graphic with a resolution of how many sensors are on the device flows from top to bottom. In this mode, the user must walk continuously as this represents walking. When walking, the magnetic display of the ground in real time will occur on the computer screen.

Ultrasound Shooting: Live shooting and working system are the same. In this mode, since the sensors are placed vertically, a vertical magnetic image is obtained on the sensor axis.

Auto Memoryless Shooting: This is the section where the computer automatically shoots. When entering this menu, the number of steps in the forward direction is entered into the device. After each press of the joystick button, the device automatically starts to take samples up to the nearest multiple of the number of steps entered. Each sample received gives an audible warning instantly. The user steps forward synchronously with this beep. The user can stop and restart the shooting at any time by pressing the joystick button at any time. As soon as the number of steps is reached, the shooting will automatically stop and the user will be notified loudly that the scan in that direction is finished. The user must then set the repeat direction and press the joystick to restart the scan. Memory is not used in this shooting mode. The data is transferred to the computer live. This mode does not work without a computer connection.

Manual Memoryless Shooting: The difference from Auto Memoryless Shooting mode is that a joystick button is pressed at each step. It is recommended to use this mode to obtain a homogeneous image, especially on rough terrain. Memory is not available in this shooting mode either. The data will be transferred to the computer live. This mode does not work without a computer connection. Automatic Memory Shooting and Manual alı Memory ”Shooting are the same as the previous two memoryless shots. The difference is that these two modes work without a computer. Especially suitable for use in areas where computer transport is problematic. The shots taken in these modes are stored in the device's pre-selected memory. This data is not deleted from the device's memory even if the device is switched off. Data can be sent to the computer at any time after shooting is complete. The device has 3 memories. This memory must be selected whichever memory will be saved. If a shot has already been taken, the memory is recorded without deleting the memory. Therefore, make sure that the memory is empty before shooting.

Send Memory: Used to transfer the stored data to the computer. The memory to be sent is first selected and then sent to the computer. In the meantime, the device will check whether it is connected to the computer, if there is no connection, it will wait until the connection is established.

Clear (Clear Memory) of the stored memory: Used to erase stored data. The memory you want to delete is selected first and then deleted. This is an irreversible process. Therefore, care must be taken.

Battery Status Display (BATTERY): Displays the battery status of the device in volts. It should not be under 11V.

About: You can find out the name and version of the device here.

Exit: Used to exit the menu.

Package Included

70 Hours Durable Li-ion Battery

Custom Carry G-Shock Bag

Free Tablet PC

3D Reflection Software